NC Machinery Logo

336 Excavator

  • Specs Summary
  • Minimum Rating
    ( )
  • Maximum Rating
    ( )
  • Emissions/Fuel Strategy
    ( )
  • Voltage
    ( )

C15 (50 Hz) China Non Road

The C15 diesel generator sets have been developed for your mission critical, standby and prime applications. Producing reliable power from 365 to 550 kVA at 50 Hz, meeting ISO 8528-5 transient response requirements and built to accept 100 percent rated load in one step. The engines are certified Low Fuel Consumption, U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 or Tier 3 Nonroad Equivalent Emission Standards), EU Stage IIIA Nonroad Emission Standards, China Nonroad III Emission Standards Emissions / Fuel Strategy.
  • Minimum Rating ( )
  • Maximum Rating ( )
  • Emissions/Fuel Strategy ( )
  • Voltage ( )
  • Frequency ( )
  • Speed ( )
  • Duty Cycle ( )
  • Engine Model ( )
  • Bore 5.4 in (137.2 mm)
  • Stroke 6.75 in (171.4 mm)
  • Displacement 927.56 in³ (15.2 l)
  • Compression Ratio ( )
  • Aspiration ( )
  • Fuel System ( )
  • Governor Type ( )
  • Length - Maximum 222.7 in (5656 mm)
  • Width - Maximum 90 in (2286 mm)
  • Height - Maximum 93.2 in (2367 mm)

Standard Equipment

Air System

  • Aftercooler core
  • Turbocharger
  • Air Cleaner - Non Canister disposable paper filter

Air Inlet

  • Air Cleaner

Control Panel

  • EMCP 4.2
  • EMCP 4 Genset Controller

Cooling

  • Package mounted radiator

Cooling System

  • Radiator and cooling fan with guard
  • Coolant drain line with valve
  • Caterpillar Extended Life Coolant
  • Fan drive, battery charging alternator drive

Fuel

  • Secondary fuel filter
  • Fuel priming pump
  • Primary fuel filter with integral water separator

Exhaust

  • Stainless steel exhaust flex, gaskets, raincap & SAE exhaust flange for customer use; shipped loose
  • Exhaust flange outlet

Fuel System

  • Standard open set fuel tank / base supplied
  • Base, formed steel with single wall integral 8-hour fuel tank

Generator

  • IP23 Protection
  • Matched to the performance and output characteristics of Cat engines
  • Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time

Generator and Attachments

  • IP23 Protection
  • A frame generator - IP21 Protection
  • Segregated low voltage (AC/DC) wiring panel
  • Mandatory Option circuit breaker, IEC, 3 pole, mounted in power
  • Optional LC frame generator - IP23 Protection
  • Power center, IP22
  • Integrated Voltage Regulator

Power Termination

  • Bus Bar

Governing System

  • Cat Electronic Governor (ADEM A4)

Lube System

  • Lubricating oil
  • Oil drain valves

Mounting

  • Rubber vibration isolators

Mounting System

  • Rubber vibration isolators

Starting/Charging

  • 24 Volt battery with rack and cables
  • Batteries
  • 24 volt starting motor

General

  • Engine and alternator pre paint, Caterpillar yellow
  • Paint - Caterpillar Yellow except rails and radiators gloss black

Optional Equipment

Air Inlet System

  • Single element air cleaner
  • Dual element air cleaner

Exhaust

  • Industrial, Residential, Critical Mufflers

Certifications

  • EU certificate of conformance
  • Global certification for CIS

Generator

  • Oversize and premium generators
  • Anti-condensation heater
  • Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)

Power Termination

  • Circuit breakers, UL listed
  • Circuit breakers, IEC compliant

Circuit breakers

  • 4 Pole (IEC-100% rated) circuit breakers - Motorised
  • 3 Pole (IEC-100% rated) circuit breakers - Motorised
  • Auxiliary contacts, circuit breaker
  • 4 Pole (IEC-100% rated) circuit breakers - Package mounted
  • Pad-lockable circuit breaker device
  • Power terminal strip
  • Shunt trip for IEC circuit breaker
  • 3 Pole (IEC-100% rated) circuit breakers - Package mounted

Control Panels

  • Protective devices: Earth fault relay ; Earth leakage ground fault relay ; Overload shutdown via breaker ; Low fuel level alarm ; Low fuel level shutdown ; High fuel level alarm ; Fuel level sensor
  • Remote annunciator
  • Oil temperature displays
  • EMCP 4.3, EMCP 4.4
  • Local annunciator
  • Local alarm horn
  • Volt free contacts

Starting/Charging

  • Jacket water heater
  • Heavy-duty starting system
  • Battery chargers
  • Oversize batteries
  • Charging alternator

Cooling System

  • Radiator duct flange
  • Stone guards
  • Low coolant temperature alarm

Enclosures

  • Sound attenuated enclosures
  • High ambient sound attenuated enclosures

Exhaust System

  • End in / End out mufflers - 10, 25 and 35 dBA attenuation
  • Manifold and turbocharger guard
  • Flexible exhaust fittings
  • 6 and 8 inch flange GP
  • 6 and 8 inch elbow kit
  • Engine mounted muffler

Fuel System

  • Dual wall fuel tank base
  • Manual fuel transfer pump
  • Fuel transfer system controls

General

  • UL 2200 package
  • Automatic transfer switches (ATS)
  • Narrow, Wide or Skid Base
  • Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
  • Single or dual wall sub-base fuel tanks
  • EU Certificate of Conformance (CE)
  • EEC Declaration of Conformity
  • The following options are based on regional and product configuration:
  • Single or dual wall integral fuel tanks
  • CSA Certification
  • Sound attenuated, weather protective or high ambient weather protective enclosure
  • Integral & sub-base UL listed dual wall fuel tanks

Generator and Attachments

  • Oversize A frame generator
  • LC frame generator
  • Oversize LC frame generator
  • CIP a frame generator
  • LC frame CIP generator
  • Permanent magnet generator
  • Space heaters
  • Ingress protection

Lube System

  • Manual sump pump

Mounting System

  • Narrow skid base - replaces standard fuel tank base

Special Test / Reports

  • PGS Test report @ 1.0 power factor
  • PGS Test report @ 0.8 power factor

Starting / Charging System

  • 5 Amp single battery charger
  • Battery disconnect switch