- Specs Summary
- Maximum Power
520 HP (388 kW)
- Maximum Torque
- Emissions
( )
- Rated Speed
( )
Cat® C13 Industrial Power Unit
The Cat® C13 Industrial Power Unit is offered in ratings ranging from 287-388 bkW (385-520 bhp) @ 1800-2100 rpm. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
-
Maximum Power
520 HP (388 kW)
-
Rated Speed
( )
-
Minimum Power
385 HP (287 kW)
-
Emissions
( )
-
Engine Configuration
( )
-
Bore
5.1 in (130 mm)
-
Stroke
6.2 in (157 mm)
-
Displacement
762.8 in³ (12.5 l)
-
Compression Ratio
( )
-
Aspiration
( )
-
Rotation from Flywheel End
( )
-
Aftertreatment
( )
-
Length
83.5 in (2122 mm)
-
Width
49 in (1247 mm)
-
Height
82 in (2082 mm)
-
Weight
5080 lb (2304 kg)
-
Length
33.6 in (854 mm)
-
Width
11.3 in (287 mm)
-
Height
21.7 in (551 mm)
-
Weight
42.8 lb (19.4 kg)
-
Volume Capacity
51.1 qt (US) (48.4 l)
Standard Equipment
Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
- Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage V)
Control System
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
- Integrated Electronic Control Unit (ECU)
- Remote fan control
Cooling System
- Vertical or RH thermostat outlet
- Centrifugal water pump
- Guidance on cooling system design available through your dealer to ensure equipment reliability
Flywheels and Flywheel Housing
- SAE No. 1 flywheel housing
- Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage V).
Fuel System
- MEUI injection
- Primary fuel filter
- Secondary fuel filters
- Fuel transfer pump
- Electronic fuel priming
Lube System
- Open crankcase ventilation system
- Oil cooler
- Oil filler
- Lube oil filter
- Oil dipstick
- Gear driven oil pump
- Choice of front, rear or center sumps
- Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage V)
Power Take Off (PTO)
- SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
General
U.S. EPA Tier 4 Final, EU Stage V Aftertreatment/ Clean Emissions Control Equipment
- Cat Regeneration System
- Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
- Aftertreatment Electronic Control Unit (ECU)
- NOx Reduction System (NRS)
- Pump Electronic Control Unit (PETU)
- Selective Catalytic Reduction (SCR)
- Available in 12V or 24V systems
Optional Equipment
