336 Excavator


Power Systems

  • Specs Summary
  • Maximum Power
    2100 HP (1506 kW)
  • Maximum Torque
    7563 lb-ft @ 1300 rpm (10254 Nm @ 1300 rpm)
  • Emissions
    ( )
  • Rated Speed
    ( )

Cat® 3516C Industrial Diesel Engine

The Cat® 3516C is offered at 1506 bkW (2100 bhp) @ 1750 rpm. This engine is available using EPA (U.S.) Flex provisions and for other global regulated and non-regulated areas. The 3516C offers unsurpassed performance and durability in a multitiude of industries and applications, including Bore and Drill Rigs, Chippers, Grinders, and Shredders, Cranes, Dredgers, Forestry, Material Handling, Mining and Pumps.

  • Maximum Power 2100 HP (1506 kW)
  • Maximum Torque 7563 lb-ft @ 1300 rpm (10254 Nm @ 1300 rpm)
  • Rated Speed ( )
  • Minimum Power 2100 HP (1506 kW)
  • Emissions ( )
  • Engine Configuration ( )
  • Bore 6.7 in (170 mm)
  • Stroke 8.5 in (215 mm)
  • Displacement 4760 in³ (78 l)
  • Compression Ratio ( )
  • Aspiration ( )
  • Rotation from Flywheel End ( )
  • Aftertreatment ( )
  • Width 60.2 in (1530 mm)
  • Height 81.2 in (2062 mm)
  • Weight - Net Dry - Basic Operating Engine Without Optional Attachments 17284 lb (7840 kg)
  • Length 129.1 in (3278 mm)

Standard Equipment

Air Inlet System

  • Air to Air Aftercooled (ATAAC)
  • Four turbochargers, center mounted

Control System

  • ADEM A4 ECM Electronic Engine Control, RH (10 amp DC power required)

Cooling System

  • Thermostats and housing
  • Gear driven centrifugal jacket water pump
  • Connections for radiator cooling

Exhaust System

  • Exhaust manifold, dry
  • Four turbochargers with watercooled bearings
  • Two exhaust outlets, 203 mm (8 in) round flange

Flywheels and Flywheel Housing

  • SAE No. 00 flywheel (183 teeth)
  • SAE No. 00 flywheel housing

Fuel System

  • Fuel filter, LH spin-on type
  • Fuel transfer pump
  • Electronically controlled unit injectors

Instrumentation

  • No standard instrument or gauge panel

Lube System

  • Crankcase breather, top mounted
  • Oil cooler
  • Oil filler and dipstick, LH
  • Oil pump
  • Oil filter, LH, spin-on type
  • Front sump oil pan, 500-hour change interval

Mounting System

  • Trunnion front support

Power Take Off

  • Front housing, two-sided

Protection System

  • ADEM A4 ECM monitoring system to provide customer programmable engine
  • Deration strategies to protect against adverse operating conditions
  • Emergency stop logic inputs provided at 40 pin customer interface connection

Starting System

  • Dual 24V electric starting motor, LH, unwired

General

  • Paint: Caterpillar yellow
  • Vibration damper
  • Lifting eyes

Optional Equipment