- Specs Summary
- Maximum Power
2100 HP (1566 kW)
- Maximum Torque
8275 lb-ft @ 1450 rpm (11220 Nm @ 1450 rpm)
- Emissions
( )
- Rated Speed
( )
Cat® 3516E Diesel Engine
The Cat® 3516E industrial diesel engine is offered at a continuous rating of 1566 kW (2100 hp) @ 1650 rpm and is designed for applications that require continuous heavy-duty service. These engines are capable of being operated at maximum power and speed up to 100% of the time without interuption or load cycling.
The 3516E is certified to meet EU Stage V, U.S. EPA Tier 4 Final, and California Air Regulations Board (CARB) standards, providing a single solution for higher regulated countries and simplifying installations for OEMs.
The 3516E offers unsurpassed performance and durability in a wide array of industries and applications, including shredders, chippers, grinders, bore and drill rigs, and pumps as well as other applications in forestry, general industrial, material handling, and mining.
-
Height
31.9 in (809 mm)
-
Weight
2378 lb (1079 kg)
-
Maximum Power
2100 HP (1566 kW)
-
Maximum Torque
8275 lb-ft @ 1450 rpm (11220 Nm @ 1450 rpm)
-
Rated Speed
( )
-
Minimum Power
2100 HP (1566 kW)
-
Emissions
( )
-
Engine Configuration
( )
-
Bore
6.7 in (170 mm)
-
Stroke
8.5 in (215 mm)
-
Displacement
4760 in³ (78 l)
-
Compression Ratio
( )
-
Aspiration
( )
-
Combustion System
( )
-
Rotation from Flywheel End
( )
-
Aftertreatment
( )
-
Width
63.6 in (1616 mm)
-
Height
83 in (2108 mm)
-
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
18025 lb (8176 kg)
-
Length
92.5 in (2350 mm)
-
Width
79.1 in (2008 mm)
-
Length
122.2 in (3105 mm)
Standard Equipment
Air Inlet System
- Four turbochargers, centre mounted
- Air-to-Air Aftercooled (ATAAC)
Control System
- Electronic engine control
Exhaust System
- Two exhaust outlets, 203 mm (8 in) round flange
- Exhaust manifold, dry
- Four turbochargers with watercooled bearings
Cooling System
- Gear-driven centrifugal jacket water pump
- Connections for radiator cooling
- Thermostats and housing
Flywheels and Flywheel Housing
- Flywheel housing, SAE No. 0 or SAE No. 00
- Flywheel, SAE No. 18 or SAE No. 21
- SAE standard rotation
Fuel System
- Fuel filter, LH spin-on type
- Fuel transfer pump
- Electronically controlled unit injectors
Lube System
- Crankcase breather, top mounted
- Oil cooler
- Oil filler and dipstick, LH
- Oil pump
- Oil filter, LH, spin-on type
- Front sump oil pan, 500-hour change interval
General
- Paint: Caterpillar yellow, with optional colors available at request
- Vibration damper
- Lifting eyes
Optional Equipment
