- Specs Summary
- Maximum Power
1350 HP (1007 kW)
- Maximum Torque
4548 lb-ft @ 1450 rpm (6166 Nm @ 1450 rpm)
- Emissions
( )
- Rated Speed
( )
Cat® C32
No matter where they operate and no matter what the application, Cat® C32 Industrial Diesel Engines will deliver durable, reliable power that will keep your customers productive while lowering their operating costs to keep them profitable. Today's Cat® engines are the finest ever produced by Caterpillar - with a legacy of power and rugged reliability driven by the demands of performance. Industries and applications powered by these high power engines include Bore/Drill Rigs, Chippers/Grinders, Construction, Cranes, Dredgers, Forestry, Hydraulic Power Units, General Industrial, Irrigation Equipment, Material Handling, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers. These C32 engines, with ratings: 708-1007 bkW (950-1350 bhp) @ 1800-2100 rpm, meet U.S. EPA Tier 2 equivalent emission standards. They are available using U.S. EPA Flexibility, and for other regulated and non-regulated areas.
-
Maximum Power
1350 HP (1007 kW)
-
Maximum Torque
4548 lb-ft @ 1450 rpm (6166 Nm @ 1450 rpm)
-
Rated Speed
( )
-
Minimum Power
950 HP (708 kW)
-
Emissions
( )
-
Engine Configuration
( )
-
Bore
5.7 in (145 mm)
-
Stroke
6.4 in (162 mm)
-
Displacement
1958.9 in³ (32.1 l)
-
Compression Ratio
( )
-
Aspiration
( )
-
Combustion System
( )
-
Rotation from Flywheel End
( )
-
Aftertreatment
( )
-
Width
58.2 in (1479 mm)
-
Height
51.9 in (1319 mm)
-
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
6495 lb (2946 kg)
-
Length
75.5 in (1917 mm)
Standard Equipment
Air Inlet System
- Twin Turbocharged Aftercooled
- Air-to-Air Aftercooled
Control System
- Electronic governing, PTO speed control
- Programmable ratings
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and total engine limit
- Electronic diagnostics and fault logging
- Engine monitoring system SAE J1939 broadcast and control
- ADEM™ A4 Electronic Control Unit (ECU)
Cooling System
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
Exhaust System
- Exhaust manifold, dry
- Optional exhaust outlet
Flywheels and Flywheel Housing
- SAE No. 1 flywheel housing
Fuel System
- MEUI injection
- Fuel filter, secondary (2 micron)
- ACERT™ Technology
- Fuel transfer pump
- Fuel priming pump
Lube System
- Crankcase breather
- Oil cooler
- Oil filler
- Lube oil filter
- Front sump oil pan
- Oil dipstick
- Gear driven oil pump
General
- Vibration damper
- Lifting eyes
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request
Optional Equipment
